Safety Interlock Disconnect with Corner Mount Switch
Switch Activation
Switch Finish
Added Layer of Safety
Designed for in-cabinet appliance garages, the Safety Interlock Disconnect can be installed with up to two receptacles, allowing connection of up to four devices. When the appliance garage door closes, concealing your toaster, coffee machine, juicer, mixer, etc., the corner-mounted switch detects the door state and de-energizes or energizes your devices and the outlets depending on which switch is used to minimize risks.
Project Flexibility
This is a more flexible alternative to our 15 amp or 20 amp Safety Outlet with Corner Switch solutions. While planning and assembly is required, this product offers the ability to connect more devices (up to 4), plus the flexibility to pair with a 15 or 20 amp standard or GFCI outlet.
The Safety Interlock Disconnect is built for safety and flexibility! Inside, a durable relay is designed to handle up to 20 amps of continuous power, ensuring reliable performance. Whether your setup requires a 15A or 20A receptacle, the Safety Interlock Disconnect can be connected to either—just follow your local electrical code for guidance. Plus, for those using electric motors, it supports up to 2 horsepower, adding even more versatility!
Smart Technology
Docking Drawer offers two types of switches: one that turns OFF power when the plunger is pushed in and another that turns ON power when the plunger is pushed in. These switches detect when a door is closing. As the door pushes against the switch, it either cuts off or initiates power to the Safety Outlet and any connected devices. The Corner Switch features a low-profile design, ensuring it doesn’t interfere with the space needed for your small appliances.
Code Compliant
This product adheres to the National Electrical Code (NEC) standards for the United States, and is listed to UL 498 and CSA 22.2 #42. Additionally, it holds ETL Listing certification for use in both the United States and Canada, attesting to its safety and compliance. The Authorities Having Jurisdiction (AHJ) has the final say on whether an installation meets the requirements of the Canadian Electrical Code.
Disconnect Specs
- Input: 100 - 125 VAC, 50/60 HzAC
- Output: 20A @ 125 VAC, 2500 VA MAX, 2 HP
- Number of Receptacles: (0)
- Tamper Resistant: Not Applicable
- LED Indicator: No
- Conformance: UL60730, UL498, EN 61558, EN60730, EN62386, CSA C22.2#42
- Environmental: -10C to +50C, non condensing
- Warranty: 2 Years
Switch Specs
- Type of Switch: Corner Mount Switch
- Switch Cable: 6 ft 24 VDC low voltage cable
- Switch Length: 1" (25.4mm)
- Switch Width: 1" (25.4mm)
- Switch Height: 1" (25.4mm)
- Mounting Details: Can install in the corner of any cabinet or enclosed space behind the hinged side of the door
- Conformance: UL60730, UL498, EN 61558, EN60730, EN62386, CSA C22.2#42
- Warranty: 2 Years
Return Policy
60 Days
What Our Customers Are Saying
- KKKatharine K.Verified BuyerI recommend this productRated 5 out of 5 stars1 year agoSimple safety feature for in-cabinet countertop oven
We used this with Ikea cabinets so that our countertop oven/air fryer that we put in a large cabinet cannot be used when the door is closed. We used Ikea doors and a piano hinge to create a DIY bifold type door that is out of the way while using the appliance and this door switch shuts off the outlet when the door is closed. We've been using it for over a year and love it!
Was this helpful? - CTChris T.Verified BuyerRated 3 out of 5 stars2 years agoOkay so far, plastic frame should be steel
Just installed the switch, but the plastic frame that the face plate attaches to has brass (?) threads for the faceplate screws and mine immediately stripped, so now it’ll have to figure out a different way to attach the faceplate. For the price, steel would probably have been more durable. I also don’t love the stab connectors for security, pigtails would be more robust but the screw doesn’t come out far enough.
Was this helpful?DDDocking Drawer2 years agoChris, thanks for the important feedback on the disconnect product. First off, we’ll replace the unit due to the stripped cover plate mounting screw. I’ll investigate using steel in the next batch. As for the stab, they connectors should be secure as they have an internal locking plate that secures the wire. I’ll send you some pictures of the locking mechanism. Thanks for the feedback. Scott
All Content © 2023 Docking Drawer a division of JTech Solutions Inc. 12893 Alcosta Blvd, Suite M, San Ramon, CA 94583